To design an exhaust piping system for 2 CHP units delivering heat to a steam boiler. Significant thermal growth had to be accommodated for which axial compensators would be required.
Fully detailed piping isometrics were produced to enable fabrication and construction to take place. Column supports were designed and detailed to carry the exhaust pipes at the required elevation.
By undertaking structural FEA analysis of the column supports we were able to prove they were fit for purpose whilst minimising the steel content.
Space constrained tie-in pipework connection.
At a STW an additional tertiary filter tank was to be installed. The outlet required connecting into the above ground drainage pipework for the neighbouring tank.
Calculating the thrust forces acing on an elbow.
When an open ended horizontal pipe was to have an elbow fitted to direct the flow vertical, we were asked to calculate the forces and verify the structural support elements.
We’re always happy to help, start the conversation and contact us below.
